Today, the editor of the sterilizer manufacturer introduces the correct operation process of the sterilizer, I hope it can be helpful to everyone!
(1) Operating process index, working pressure and working temperature.
(2) Operating methods and procedures and precautions.
(3) Items and parts should be inspected during production operation, as well as possible abnormal phenomena and preventive measures during operation.
(4) Maintenance methods when equipment is deactivated.
The operating personnel used should pass the training and examination and strictly abide by the operating regulations and post responsibility system; if abnormalities are found, they should be handled in time. Equipped with pressure gauges, thermometers and other accessories, to maintain, complete, sensitive and reliable. Maintenance and periodic calibration should be added during use. The starting pressure of this equipment is equal to the design pressure, it should be kept sensitive and reliable, and it should be prevented from being adjusted arbitrarily. Pressure gauge and thermometer accuracy grades are both 1.5 grades. Differences within tolerances are normal. Unleaded seal pressure gauges must not be used. The pressure gauge indications are broken, the scale is not clear, the dial is broken, the pointer does not return to zero after the pressure is released, and the seal is damaged. It should be replaced immediately. The thermometer should be inspected regularly. It should be calibrated with a standard thermometer before use and checked once a year thereafter. Any mercury column that breaks and differs from the standard temperature by more than 0.5 ° C should be sent for repair or replacement.
The inspection should be conducted regularly, at least once every six months, and at least once every year. The preparatory work and inspection items before the inspection shall be carried out in accordance with the "rules" and relevant regulations. During use, grease and oil should always be applied to the sliding and rolling contact parts of the inclined self-locking wedges, rollers, pot ears, and swivel flanges to ensure that the friction surface is in a lubricated state.
The above is introduced by everyone. For more questions, please continue to pay attention to our website.
URL of this article: http://wuwuapp8.com/info/475.html